This topic describes how you can command TestComplete to run a script routine by name. Before you continue, we recommend that you read the Working With TestComplete via COM topic that provides detailed information on working with the TestComplete engine via COM.
To call a script routine via COM, you should use the RunRoutine or RunRoutineEx methods of the Integration object (for more information on these methods and the object, see Working With TestComplete via COM). The difference between the methods are that RunRoutineEx lets you call routines containing parameters, while RunRoutine can only call script functions that do not use parameters. In other words, RunRoutine is a simpler variant of RunRoutineEx. Both methods can be used to call script routines that return values.
| Note: | In order for TestComplete to be able to call these routines, the test must not be running. That is, a call to RunRoutine or RunRoutineEx will fail if TestComplete is running tests at the moment of the call. In order to check whether a test is running, use the IsRunning property of the TestComplete Integration object. |
The declarations of the RunRoutine and RunRoutineEx methods are very similar:
RunRoutine(ProjectName, UnitName, RoutineName)
RunRoutineEx(ProjectName, UnitName, RoutineName, Parameters)
- ProjectName - Name of the TestComplete project holding the routine. To execute the routine, this project must be loaded in TestComplete.
- UnitName - Name of the script unit that holds the routine to be called and that belongs to the project specified by ProjectName.
- RoutineName - Name of the desired routine.
- Parameters - An OLE Variant-compatible array of the parameters passed to the script routine.
Both functions do not pause the program execution until the run of the specified script routine is over. To obtain the routine result, use the RoutineResult property of the TestComplete Integration object.
If by some reason the use of RunRoutineEx is not possible, you can pass parameters through a temporary location: file, database, clipboard, properties of a COM object, and so on. For example, you can --
-
Write the desired data to a small file and then add the code, that will retrieve data from this file, to your script routine called via COM.
-
Store data to the clipboard, write the script code that will parse the clipboard data and execute this code at the beginning of the script routine called via COM.
-
And so on.
The following example demonstrates how you can call a script routine from a Visual Basic or C# application using the RunRoutine and RunRoutineEx functions.
RunRoutine Example
The following sample demonstrates how to call a script routine from a Visual Basic or C# application. The sample code passes parameters via a temporary file. The sample code of the called script routine follows these samples. Note that C# does not allow performing certain actions with objects defined at runtime. For example, you cannot use the switch statement to check object properties.
Visual Basic
Sub MySub
' Initialize variables
sProjectNameFileName = "C:\Work\MyProject\MyProjectSuite.pjs"
sProjectName = "TestProject"
sUnitName = "Unit1"
sRoutineName = "MyRoutine"
' Creates the application object
Set TestCompleteApp = CreateObject("TestComplete.TestCompleteApplication.15")
' Obtains the integration object
Set IntegrationObject = TestCompleteApp.Integration
' Opens the project
IntegrationObject.OpenProjectSuiteEx sProjectNameFileName
' Saves data to a temporary file
Set FSO = CreateObject("Scripting.FileSystemObject")
Set MyFile = FSO.OpenTextFile("C:\TempFile.txt", 2, True) ' Open for writing
MyFile.WriteLine "John Smith,[email protected],05/05/2009,0000-1234-5678-9000"
MyFile.Close
' Needed to process errors
Err.Clear
On Error GoTo Err_Label
' Runs the routine
IntegrationObject.RunRoutine sProjectName, sUnitName, sRoutineName
' Waits until the test run is over
While IntegrationObject.IsRunning
DoEvents
Wend
' Check the results
If aqObject.GetVarType(IntegrationObject.RoutineResult) <> vbEmpty Then
MsgBox "Script routine returned " + IntegrationObject.RoutineResult
Else
MsgBox "Script routine result did not return any result"
End If
Set LastResult = IntegrationObject.GetLastResultDescription
Select Case LastResult.Status
Case 0: MsgBox "The test run finished successfully."
Case 1: MsgBox "Warning messages were posted to the test log."
Case 2: MsgBox "Error messages were posted to the test log."
End Select
Err_Label:
' Process errors
If Err.Number <> 0 Then
MsgBox "Cannot start the test. Reason: " + Err.Description, vbCritical, "Error"
End If
' Quits TestComplete
TestCompleteApp.Quit
End Sub
Visual C# Early Binding
// Add the following lines to your unit
using System.Runtime.InteropServices;
using TestComplete;
...
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
private void button1_Click(object sender, EventArgs e)
{
// Invokes TestComplete upon a button click
TestFunc();
}
private void TestFunc()
{
const string TCProgID = "TestComplete.TestCompleteApplication.15";
object TestCompleteObject = null;
// Initialize variables
string sProjectFileName = "C:\\Work\\MyProject\\MyProjectSuite.pjs";
string sProjectName = "TestProject";
string sUnitName = "Unit1";
string sRoutineName = "MyRoutine";
// Obtains access to TestComplete
try
{
TestCompleteObject = Marshal.GetActiveObject(TCProgID);
}
catch
{
try
{
TestCompleteObject = Activator.CreateInstance(Type.GetTypeFromProgID(TCProgID));
}
catch
{
}
}
if (TestCompleteObject == null) return;
// Obtain the ITestCompleteCOMManager object
TestComplete.ITestCompleteCOMManager TestCompleteManager = (TestComplete.ITestCompleteCOMManager)TestCompleteObject;
// Obtain the Integration object
TestComplete.ItcIntegration IntegrationObject = TestCompleteManager.Integration;
// We have a reference to the integration object.
// Now we can use its methods and properties to automate TestComplete.
// Loads the project suite
IntegrationObject.OpenProjectSuiteEx(sProjectFileName);
// Save data to a temporary file
System.IO.StreamWriter MyFile = new System.IO.StreamWriter("C:\\TempFile.txt");
MyFile.WriteLine("John Smith,[email protected],05/05/2009,0000-1234-5678-9000");
MyFile.Close();
try
{
// Runs the routine
IntegrationObject.RunRoutine(sProjectName, sUnitName, sRoutineName);
// Waits until testing is over
while (IntegrationObject.IsRunning())
Application.DoEvents();
// Check the results
object RoutineResult = IntegrationObject.RoutineResult;
if (RoutineResult != null)
System.Windows.Forms.MessageBox.Show("Script routine returned " + RoutineResult.ToString());
else
System.Windows.Forms.MessageBox.Show("Script routine did not return any result");
switch (IntegrationObject.GetLastResultDescription().Status)
{
case TestComplete.TC_LOG_STATUS.lsOk:
System.Windows.Forms.MessageBox.Show(this, "The test run finished successfully.");
break;
case TestComplete.TC_LOG_STATUS.lsWarning:
System.Windows.Forms.MessageBox.Show(this, "Warning messages were posted to the test log.");
break;
case TestComplete.TC_LOG_STATUS.lsError:
System.Windows.Forms.MessageBox.Show(this, "Error messages were posted to the test log.");
break;
}
}
catch (System.Runtime.InteropServices.COMException ex)
{
System.Windows.Forms.MessageBox.Show("An exception occurred: " + ex.Message);
}
finally
{
// Closes TestComplete
TestCompleteManager.Quit();
// Releases COM objects
Marshal.ReleaseComObject(IntegrationObject);
Marshal.ReleaseComObject(TestCompleteManager);
Marshal.ReleaseComObject(TestCompleteObject);
}
}
}
Visual C# Late Binding
// Add the following lines to your unit
using System.Runtime.InteropServices;
using TestComplete;
...
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
private void button1_Click(object sender, EventArgs e)
{
// Invokes TestComplete upon a button click
TestFunc();
}
private void TestFunc()
{
const string TCProgID = "TestComplete.TestCompleteApplication.15";
dynamic TestCompleteObject = null;
// Initialize variables
string sProjectFileName = "C:\\Work\\MyProject\\MyProjectSuite.pjs";
string sProjectName = "TestProject";
string sUnitName = "Unit1";
string sRoutineName = "MyRoutine";
// Obtains access to TestComplete
try
{
TestCompleteObject = Marshal.GetActiveObject(TCProgID);
}
catch
{
try
{
TestCompleteObject = Activator.CreateInstance(Type.GetTypeFromProgID(TCProgID));
}
catch
{
}
}
if (TestCompleteObject == null) return;
// Obtains Integration object during runtime
dynamic IntegrationObject = TestCompleteObject.Integration;
// We have a reference to the integration object.
// Now we can use its methods and properties to automate TestComplete.
// Loads the project suite
IntegrationObject.OpenProjectSuiteEx(sProjectFileName);
// Save data to a temporary file
System.IO.StreamWriter MyFile = new System.IO.StreamWriter("C:\\TempFile.txt");
MyFile.WriteLine("John Smith,[email protected],05/05/2009,0000-1234-5678-9000");
MyFile.Close();
try
{
// Runs the routine
IntegrationObject.RunRoutine(sProjectName, sUnitName, sRoutineName);
// Waits until testing is over
while (IntegrationObject.IsRunning())
Application.DoEvents();
// Check the results
object RoutineResult = IntegrationObject.RoutineResult;
if (RoutineResult != null)
System.Windows.Forms.MessageBox.Show("Script routine returned " + RoutineResult.ToString());
else
System.Windows.Forms.MessageBox.Show("Script routine did not return any result");
if (IntegrationObject.GetLastResultDescription().Status == 0)
{
System.Windows.Forms.MessageBox.Show(this, "The test run finished successfully.");
}
if (IntegrationObject.GetLastResultDescription().Status == 1)
{
System.Windows.Forms.MessageBox.Show(this, "Warning messages were posted to the test log.");
}
if (IntegrationObject.GetLastResultDescription().Status == 2)
{
System.Windows.Forms.MessageBox.Show(this, "Error messages were posted to the test log.");
}
}
catch (System.Runtime.InteropServices.COMException ex)
{
System.Windows.Forms.MessageBox.Show("An exception occurred: " + ex.Message);
}
finally
{
// Closes TestComplete
TestCompleteManager.Quit();
// Releases COM objects
Marshal.ReleaseComObject(IntegrationObject);
Marshal.ReleaseComObject(TestCompleteObject);
}
}
}
Here is a sample script that is run via COM. The above Visual Basic or C# code calls the MyRoutine procedure, which in turn calls the ReadData function to read data from a file:
JavaScript
function ReadData()
{
let ForReading, FSO, MyFile, Cnt, Data, s;
// Open the file
ForReading = 1;
FSO = getActiveXObject("Scripting.FileSystemObject");
MyFile = FSO.OpenTextFile("C:\\TempFile.txt", ForReading, false);
// Read data from the file
s = MyFile.ReadLine(); // We use only one line of data
// Obtains data and stores them to an array
aqString.ListSeparator = ",";
Cnt = aqString.GetListLength(s);
Data = new Array(Cnt + 1);
Data[0] = Cnt;
for(let i = 0; i < Cnt; i++)
Data[i + 1] = aqString.GetListItem(s, i);
// Close the file
MyFile.Close();
// Returns the result
return Data;
}
function MyRoutine()
{
let Data, s;
// Obtains data
Data = ReadData();
// Work with data
s = "";
for(let i = 1; i <= Data[0]; i++)
{
Log.Message(Data[i]);
s = s + Data[i] + ", ";
}
return s;
}
JScript
function ReadData()
{
var ForReading, FSO, MyFile, Cnt, i, Data, s;
// Open the file
ForReading = 1;
FSO = new ActiveXObject("Scripting.FileSystemObject");
MyFile = FSO.OpenTextFile("C:\\TempFile.txt", ForReading, false);
// Read data from the file
s = MyFile.ReadLine(); // We use only one line of data
// Obtains data and stores them to an array
aqString.ListSeparator = ",";
Cnt = aqString.GetListLength(s);
Data = new Array(Cnt + 1);
Data[0] = Cnt;
for(i = 0; i < Cnt; i++)
Data[i + 1] = aqString.GetListItem(s, i);
// Close the file
MyFile.Close();
// Returns the result
return Data;
}
function MyRoutine()
{
var Data, i, s;
// Obtains data
Data = ReadData();
// Work with data
s = "";
for(i = 1; i <= Data[0]; i++)
{
Log.Message(Data[i]);
s = s + Data[i] + ", ";
}
return s;
}
Python
def ReadData():
# Open the file
ForReading = 1;
FSO = Sys.OleObject["Scripting.FileSystemObject"];
MyFile = FSO.OpenTextFile("C:\\TempFile.txt", ForReading, False);
# Read data from the file
s = MyFile.ReadLine(); # We use only one line of data
# Obtains data and stores them to an array
aqString.ListSeparator = ",";
Cnt = aqString.GetListLength(s);
Data = [];
Data.append(Cnt);
for i in range (0, Cnt):
Data.append(aqString.GetListItem(s, i));
# Close the file
MyFile.Close();
# Returns the result
return Data;
def MyRoutine():
# Obtains data
Data = ReadData();
# Work with data
s = "";
for i in range (1, Data[0]+1):
Log.Message(Data[i]);
s = s + aqConvert.VarToStr(Data[i]) + ', ';
return s;VBScript
Function ReadData
' Open file
ForReading = 1
Set FSO = CreateObject("Scripting.FileSystemObject")
Set MyFile = FSO.OpenTextFile("C:\TempFile.txt", ForReading, False)
' Read data from the file
s = MyFile.ReadLine ' We use only one line of data
' Obtains data and stores them to an array
aqString.ListSeparator = ","
Cnt = aqString.GetListLength(s)
ReDim Data(Cnt + 1)
Data(0) = Cnt
For i = 0 To Cnt - 1
Data(i + 1) = aqString.GetListItem(s, i)
Next
' Close the file
MyFile.Close
' Returns the result
ReadData = Data
End Function
Function MyRoutine
' Obtains data
Data = ReadData
' Work with data
MyRoutine = ""
For i = 1 To Data(0)
Log.Message Data(i)
MyRoutine = MyRoutine & Data(i) & ", "
Next
End Function
DelphiScript
function ReadData();
var
ForReading, FSO, MyFile, Cnt, i, Data, s : OleVariant;
begin
// Open the file
ForReading := 1;
FSO := Sys.OleObject('Scripting.FileSystemObject');
MyFile := FSO.OpenTextFile('C:\TempFile.txt', ForReading, false);
// Read data from the file
s := MyFile.ReadLine(); // We use only one line of data
// Obtains data and stores them to an array
aqString.ListSeparator := ',';
Cnt := aqString.GetListLength(s);
Data := BuiltIn.CreateVariantArray(0, Cnt + 1);
Data[0] := Cnt;
for i := 0 to Cnt - 1 do
Data[i + 1] := aqString.GetListItem(s, i);
// Close the file
MyFile.Close();
// Returns the result
Result := Data;
end;
function MyRoutine();
var
Data, i : OleVariant;
begin
// Obtains data
Data := ReadData();
// Work with data
Result := '';
for i := 1 to Data[0] do
begin
Log.Message(Data[i]);
Result := Result + aqConvert.VarToStr(Data[i]) + ', ';
end;
end;
C++Script, C#Script
function ReadData()
{
var ForReading, FSO, MyFile, Cnt, i, Data;
// Open the file
ForReading = 1;
FSO = new ActiveXObject("Scripting.FileSystemObject");
MyFile = FSO["OpenTextFile"]("C:\\TempFile.txt", ForReading, false);
// Read data from the file
s = MyFile["ReadLine"](); // We use only one line of data
// Obtains data and stores them to an array
aqString["ListSeparator"] = ",";
Cnt = aqString["GetListLength"](s);
Data = new Array(Cnt + 1);
Data[0] = Cnt;
for(i = 0; i < Cnt; i++)
Data[i + 1] = aqString["GetListItem"](s, i);
// Close the file
MyFile["Close"]();
// Returns the result
return Data;
}
function MyRoutine()
{
var Data, i, s;
// Obtains data
Data = ReadData();
// Work with data
s = "";
for(i = 1; i <= Data[0]; i++)
{
Log["Message"](Data[i]);
s = s + aqConvert["VarToStr"](Data[i]) + ", ";
}
return s;
}
RunRoutineEx Example
The following sample demonstrates how to call a script routine from a Visual Basic or C# application using the RunRoutineEx method. The sample code of the called script routine follows the VB and C# samples:
Visual Basic
Sub MySub()
Dim ParamArr(3)
' Initialize variables
sProjectNameFileName = "C:\MyProjects\MyProject\MyProject.mds"
sProjectName = "MyProject"
sUnitName = "Unit1"
sRoutineName = "MyRoutine"
ParamArr(0) = "John Smith"
ParamArr(1) = "[email protected]"
ParamArr(2) = "5/5/2009"
ParamArr(3) = "0000-1234-5678-9000"
' Creates the application object
Set TestCompleteApp = CreateObject("TestComplete.TestCompleteApplication.15")
' Obtains the integration object
Set IntegrationObject = TestCompleteApp.Integration
' Opens the project
IntegrationObject.OpenProjectSuiteEx sProjectNameFileName
' Needed to process errors
On Error GoTo Err_Label
' Runs the routine
IntegrationObject.RunRoutineEx(sProjectName, sUnitName, sRoutineName, ParamArr)
' Waits until the test run is over
While IntegrationObject.IsRunning
DoEvents
Wend
' Check the results
If aqObject.GetVarType(IntegrationObject.RoutineResult) <> vbEmpty Then
MsgBox "Script routine result : " + IntegrationObject.RoutineResult
Else
MsgBox "Script routine result did not return any result."
End If
Set LastResult = IntegrationObject.GetLastResultDescription
Select Case LastResult.Status
Case 0: MsgBox "The test run finished successfully."
Case 1: MsgBox "Warning messages were posted to the test log."
Case 2: MsgBox "Error messages were posted to the test log."
End Select
Err_Label:
' Process errors
If Err.Number > 0 Then
MsgBox "Cannot start the test. Reason: " + Err.Description, vbCritical, "Error"
End If
' Quits TestComplete
TestCompleteApp.Quit
End Sub
Visual C# Early Binding
// Add the following lines to your unit
using System.Runtime.InteropServices;
using TestComplete;
...
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
private void button1_Click(object sender, EventArgs e)
{
// Invokes TestComplete upon a button click
TestFunc();
}
private void TestFunc()
{
const string TCProgID = "TestComplete.TestCompleteApplication.10";
object TestCompleteObject = null;
// Initialize variables
string sProjectFileName = "C:\\Work\\MyProject\\MyProjectSuite.pjs";
string sProjectName = "TestProject";
string sUnitName = "Unit1";
string sRoutineName = "MyRoutine";
string[] Params = { "John Smith", "[email protected]", "05/05/2009", "0000-1234-5678-9000" };
// Obtains access to TestComplete
try
{
TestCompleteObject = Marshal.GetActiveObject(TCProgID);
}
catch
{
try
{
TestCompleteObject = Activator.CreateInstance(Type.GetTypeFromProgID(TCProgID));
}
catch
{
}
}
if (TestCompleteObject == null) return;
// Obtain the ITestCompleteCOMManager object
TestComplete.ITestCompleteCOMManager TestCompleteManager = (TestComplete.ITestCompleteCOMManager)TestCompleteObject;
// Obtain the Integration object
TestComplete.ItcIntegration IntegrationObject = TestCompleteManager.Integration;
// We have a reference to the integration object.
// Now we can use its methods and properties to automate TestComplete.
// Loads the project suite
IntegrationObject.OpenProjectSuiteEx(sProjectFileName);
// Save data to a temporary file
System.IO.StreamWriter MyFile = new System.IO.StreamWriter("C:\\TempFile.txt");
MyFile.WriteLine("John Smith,[email protected],05/05/2009,0000-1234-5678-9000");
MyFile.Close();
try
{
// Runs the routine
IntegrationObject.RunRoutineEx(sProjectName, sUnitName, sRoutineName, Params);
// Waits until testing is over
while (IntegrationObject.IsRunning())
Application.DoEvents();
// Check the results
object RoutineResult = IntegrationObject.RoutineResult;
if (RoutineResult != null)
System.Windows.Forms.MessageBox.Show("Script routine returned " + RoutineResult.ToString());
else
System.Windows.Forms.MessageBox.Show("Script routine did not return any result");
switch (IntegrationObject.GetLastResultDescription().Status)
{
case TestComplete.TC_LOG_STATUS.lsOk:
System.Windows.Forms.MessageBox.Show(this, "The test run finished successfully.");
break;
case TestComplete.TC_LOG_STATUS.lsWarning:
System.Windows.Forms.MessageBox.Show(this, "Warning messages were posted to the test log.");
break;
case TestComplete.TC_LOG_STATUS.lsError:
System.Windows.Forms.MessageBox.Show(this, "Error messages were posted to the test log.");
break;
}
}
catch (System.Runtime.InteropServices.COMException ex)
{
System.Windows.Forms.MessageBox.Show("An exception occurred: " + ex.Message);
}
finally
{
// Closes TestComplete
TestCompleteManager.Quit();
// Releases COM objects
Marshal.ReleaseComObject(IntegrationObject);
Marshal.ReleaseComObject(TestCompleteManager);
Marshal.ReleaseComObject(TestCompleteObject);
}
}
}
Visual C# Late Binding
// Add the following lines to your unit
using System.Runtime.InteropServices;
using TestComplete;
...
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
private void button1_Click(object sender, EventArgs e)
{
// Invokes TestComplete upon a button click
TestFunc();
}
private void TestFunc()
{
const string TCProgID = "TestComplete.TestCompleteApplication.10";
object TestCompleteObject = null;
// Initialize variables
string sProjectFileName = "C:\\Work\\MyProject\\MyProjectSuite.pjs";
string sProjectName = "TestProject";
string sUnitName = "Unit1";
string sRoutineName = "MyRoutine";
string[] Params = { "John Smith", "[email protected]", "05/05/2009", "0000-1234-5678-9000" };
// Obtains access to TestComplete
try
{
TestCompleteObject = Marshal.GetActiveObject(TCProgID);
}
catch
{
try
{
TestCompleteObject = Activator.CreateInstance(Type.GetTypeFromProgID(TCProgID));
}
catch
{
}
}
if (TestCompleteObject == null) return;
// Obtains Integration object during runtime
dynamic IntegrationObject = TestCompleteObject.Integration;
// We have a reference to the integration object.
// Now we can use its methods and properties to automate TestComplete.
// Loads the project suite
IntegrationObject.OpenProjectSuiteEx(sProjectFileName);
// Save data to a temporary file
System.IO.StreamWriter MyFile = new System.IO.StreamWriter("C:\\TempFile.txt");
MyFile.WriteLine("John Smith,[email protected],05/05/2009,0000-1234-5678-9000");
MyFile.Close();
try
{
// Runs the routine
IntegrationObject.RunRoutineEx(sProjectName, sUnitName, sRoutineName, Params);
// Waits until testing is over
while (IntegrationObject.IsRunning())
Application.DoEvents();
// Check the results
object RoutineResult = IntegrationObject.RoutineResult;
if (RoutineResult != null)
System.Windows.Forms.MessageBox.Show("Script routine returned " + RoutineResult.ToString());
else
System.Windows.Forms.MessageBox.Show("Script routine did not return any result");
if (IntegrationObject.GetLastResultDescription().Status == 0)
{
System.Windows.Forms.MessageBox.Show(this, "The test run finished successfully.");
}
if (IntegrationObject.GetLastResultDescription().Status == 1)
{
System.Windows.Forms.MessageBox.Show(this, "Warning messages were posted to the test log.");
}
if (IntegrationObject.GetLastResultDescription().Status == 2)
{
System.Windows.Forms.MessageBox.Show(this, "Error messages were posted to the test log.");
}
}
catch (System.Runtime.InteropServices.COMException ex)
{
System.Windows.Forms.MessageBox.Show("An exception occurred: " + ex.Message);
}
finally
{
// Closes TestComplete
TestCompleteManager.Quit();
// Releases COM objects
Marshal.ReleaseComObject(IntegrationObject);
Marshal.ReleaseComObject(TestCompleteObject);
}
}
}
Here is sample script code where the execution is initiated via COM. The VB or C# code described above calls the MyRoutine procedure.
JavaScript, JScript
function MyRoutine(Param1, Param2, Param3, Param4)
{
Log.Message("Param1: " + Param1);
Log.Message("Param2: " + Param2);
Log.Message("Param3: " + Param3);
Log.Message("Param4: " + Param4);
return Param1 + ", " + Param2 + ", " + Param3 + ", " + Param4
}
Python
def MyRoutine(Param1, Param2, Param3, Param4):
Log.Message("Param1: " + Param1);
Log.Message("Param2: " + Param2);
Log.Message("Param3: " + Param3);
Log.Message("Param4: " + Param4);
return Param1 + ", " + Param2 + ", " + Param3 + ", " + Param4;VBScript
Function MyRoutine(Param1, Param2, Param3, Param4)
Log.Message "Param1: " & Param1
Log.Message "Param2: " & Param2
Log.Message "Param3: " & Param3
Log.Message "Param4: " & Param4
MyRoutine = Param1 & ", " & Param2 & ", " & Param3 & ", " & Param4
End Function
DelphiScript
function MyRoutine(Param1, Param2, Param3, Param4);
begin
Log.Message('Param1: ' + Param1);
Log.Message('Param2: ' + Param2);
Log.Message('Param3: ' + Param3);
Log.Message('Param4: ' + Param4);
Result := Param1 + ', ' + Param2 + ', ' + Param3 + ', ' + Param4;
end;
C++Script, C#Script
function MyRoutine(Param1, Param2, Param3, Param4)
{
Log["Message"]("Param1: " + Param1);
Log["Message"]("Param2: " + Param2);
Log["Message"]("Param3: " + Param3);
Log["Message"]("Param4: " + Param4);
return Param1 + ", " + Param2 + ", " + Param3 + ", " + Param4
}