Description

The WriteInt method writes an integer value to a binary file.

Declaration

aqBinaryFileObj.WriteInt()

aqBinaryFileObj	An expression, variable or parameter that specifies a reference to an aqBinaryFile object
Result	Integer

Applies To

The method is applied to the following object:

aqBinaryFile

Result Value

The integer value to write to a file.

Remarks

On success, the cursor position is shifted by the length of the written data.
To use this method, you should open the needed file with the faWrite or faReadWrite access permission. See the description of the OpenBinaryFile method.

Example

The code below opens a file for reading, posts its data to the test log in different formats (binary, boolean, and so on) and then closes the file.

JavaScript, JScript

function ReadingDataFromBinaryFile()
{
Path = "C:\\MyFiles\\FileName.txt";

// Creates a new file and opens it for writing in binary mode
myFile = aqFile.OpenBinaryFile(Path, aqFile.faWrite, true);

// Writes data to the file
myFile.WriteBool(false);
myFile.WriteCurrency(3000000000);
myFile.WriteDate(aqDateTime.Today());
myFile.WriteFloat(1543.514)
myFile.WriteInt(58942);
myFile.WriteString("Hello!");

// Closes the file
myFile.Close();

// Opens the file for reading
myFile = aqFile.OpenBinaryFile(Path, aqFile.faRead);

// Reads data from the file in different formats
Log.Message("The bolean is: "+ myFile.ReadBool());
Log.Message("The currency is: "+ myFile.ReadCurrency());
Log.Message("The date is: " + myFile.ReadDate());
Log.Message("The float number is: " + myFile.ReadFloat());
Log.Message("The integer number is: "+ myFile.ReadInt());
Log.Message("The string is: "+ myFile.ReadString(6));

// Closes the file
myFile.Close();
}

/*
  The routine produces the following output:
  The bolean is: false
  The currency is: 3000000000
  The date is: Wed Jun 23 00:00:00 UTC+0400 2010
  The float number is: 1543.514
  The integer number is: 58942
  The string is: Hello!
*/

Python

def ReadingDataFromBinaryFile():
  Path = "C:\\MyFiles\\FileName.txt"
  # Creates a new file and opens it for writing in binary mode
  myFile = aqFile.OpenBinaryFile(Path, aqFile.faWrite, True)
  # Writes data to the file
  myFile.Write(False)
  myFile.Write(3000000000) 
  myFile.Write(aqDateTime.Today())
  myFile.Write(1543.514)
  myFile.Write(58942)
  myFile.Write("Hello!")
  # Closes the file
  myFile.Close()
  # Opens the file for reading
  myFile = aqFile.OpenBinaryFile(Path, aqFile.faRead)
  # Reads data from the file in different formats 
  Log.Message("The bolean is: "+ str(myFile.ReadBool()))
  Log.Message("The currency is: "+ str(myFile.ReadCurrency()))
  Log.Message("The date is: " + str(myFile.ReadDate()))
  Log.Message("The float number is: " + str(myFile.ReadFloat()))
  Log.Message("The integer number is: "+ str(myFile.ReadInt()))
  Log.Message("The string is: "+ myFile.ReadString(6))
  # Closes the file
  myFile.Close();

# The routine produces the following output:
# The bolean is: False
# The currency is: 3000000000
# The date is: Wed Jun 23 00:00:00 UTC+0400 2010
# The float number is: 1543.514
# The integer number is: 58942
# The string is: Hello!

VBScript

Sub ReadingDataFromBinaryFile()
Dim Path, myFile
'Set Path = "C:\MyFiles\FileName.txt"

' Creates a new file and opens it for writing in binary mode
Set myFile = aqFile.OpenBinaryFile("C:\MyFiles\FileName.txt", aqFile.faWrite, true)

' Writes data to the file
Call myFile.WriteBool(false)
Call myFile.WriteCurrency(3000000000)
Call myFile.WriteDate(aqDateTime.Today())
Call myFile.WriteFloat(1543.514)
Call myFile.WriteInt(58942)
Call myFile.WriteString("Hello!")

' Closes the file
Call myFile.Close()

' Opens the file for reading
Set myFile = aqFile.OpenBinaryFile("C:\MyFiles\FileName.txt", aqFile.faRead)

' Reads data from the file in different formats
Call Log.Message("The bolean is: "+ aqConvert.VarToStr(myFile.ReadBool()))
Call Log.Message("The currency is: "+ aqConvert.CurrencyToStr(myFile.ReadCurrency()))
Call Log.Message("The date is: " + aqConvert.DateTimeToStr(myFile.ReadDate()))
Call Log.Message("The float number is: " + aqConvert.FloatToStr(myFile.ReadFloat()))
Call Log.Message("The integer number is: "+ aqConvert.IntToStr(myFile.ReadInt()))
Call Log.Message("The string is: "+ myFile.ReadString(6))

' Closes the file
Call myFile.Close()
End Sub

' The routine produces the following output:
' The bolean is: false
' The currency is: 3000000000
' The date is: Wed Jun 23 00:00:00 UTC+0400 2010
' The float number is: 1543.514
' The integer number is: 58942
' The string is: Hello!

DelphiScript

procedure ReadingDataFromBinaryFile;
var Path, myFile: OleObject;
begin
Path := 'C:\MyFiles\FileName.txt';

// Creates a new file and opens it for writing in binary mode
myFile := aqFile.OpenBinaryFile(Path, aqFile.faWrite, true);

// Writes data to the file
myFile.WriteBool(false);
myFile.WriteCurrency(3000000000);
myFile.WriteDate(aqDateTime.Today());
myFile.WriteFloat(1543.514);
myFile.WriteInt(58942);
myFile.WriteString('Hello!');

// Closes the file
myFile.Close();

// Opens the file for reading
myFile := aqFile.OpenBinaryFile(Path, aqFile.faRead);

// Reads data from the file in different formats
Log.Message('The bolean is: '+ myFile.ReadBool());
Log.Message('The currency is: '+ myFile.ReadCurrency());
Log.Message('The date is: ' + myFile.ReadDate());
Log.Message('The float number is: ' + myFile.ReadFloat());
Log.Message('The integer number is: '+ myFile.ReadInt());
Log.Message('The string is: '+ myFile.ReadString(6));

// Closes the file
myFile.Close();
end;

{
  The routine produces the following output:
  The bolean is: false
  The currency is: 3000000000
  The date is: Wed Jun 23 00:00:00 UTC+0400 2010
  The float number is: 1543.514
  The integer number is: 58942
  The string is: Hello!
}

C++Script, C#Script

function ReadingDataFromBinaryFile()
{
Path = "C:\\MyFiles\\FileName.txt";

// Creates a new file and opens it for writing in binary mode
myFile = aqFile["OpenBinaryFile"](Path, aqFile.faWrite, true);

// Writes data to the file
myFile["WriteBool"](false);
myFile["WriteCurrency"](3000000000);
myFile["WriteDate"](aqDateTime.Today());
myFile["WriteFloat"](1543.514)
myFile["WriteInt"](58942);
myFile["WriteString"]('Hello!');

// Closes the file
myFile["Close"]();

// Opens the file for reading
myFile = aqFile["OpenBinaryFile"](Path, aqFile.faRead);

// Reads data from the file in different formats
Log["Message"]( "The bolean is: "+ myFile["ReadBool"]() );
Log["Message"]( "The currency is: "+ myFile["ReadCurrency"]() );
Log["Message"]( "The date is: " + myFile["ReadDate"]());
Log["Message"]( "The float number is: " + myFile["ReadFloat"]() );
Log["Message"]( "The integer number is: "+ myFile["ReadInt"]() );
Log["Message"]( "The string is: "+ myFile["ReadString"](6) );

// Closes the file
myFile["Close"]();
}

/*
  The routine produces the following output:
  The bolean is: false
  The currency is: 3000000000
  The date is: Wed Jun 23 00:00:00 UTC+0400 2010
  The float number is: 1543.514
  The integer number is: 58942
  The string is: Hello!
*/

WriteInt Method

Description

Declaration

Applies To

Result Value

Remarks

Example

See Also